MFJ MFJ-1272M, Инструкция по эксплуатации, Страница: 7 / 20

MFJ-1272M Instruction Manual
7
Receive Audio Connections
Table 1 below shows where you would place a jumper if
your radio has RECEIVE AUDIO on one of the microphone
pins. For example, if your radio has RECEIVE AUDIO on
pin 3 on a Kenwood microphone, you would place a jumper
on position R3A in the RECEIVE section of header HD1.
If your radio does not have RECEIVE AUDIO on one of the
microphone pins, then do not place a jumper in the
RECEIVE section of header HD1.
Radio
MIC Pin
*
MFJ-1272M
Header
Jumper Placement
for
Kenwood & Yaesu
Jumper Placement
for
Icom & Radio Shack
1 HD1 RECEIVE--R1A RECEIVE--R8A
2 HD1 RECEIVE--R2A RECEIVE--R7A
3 HD1 RECEIVE--R3A RECEIVE--R6A
4 HD1 RECEIVE--R4A RECEIVE--R5A
5 HD1 RECEIVE--R5A RECEIVE--R4A
6 HD1 RECEIVE--R6A RECEIVE--R3A
7 HD1 RECEIVE--R7A RECEIVE--R2A
8 HD1 RECEIVE--R8A RECEIVE--R1A
Table 1
*Refer to External Audio , page 3
PTT (Push-to-Talk Connections)
Table 2 below shows where you would place a jumper,
depending on what microphone pin is designated, PTT.
For example, if PTT is designated as being pin 4 on a
Kenwood microphone, then you would place a jumper on
position, R4B in the PTT section of header HD1.
Radio
MIC Pin
MFJ-1272M
Header
Jumper Placement
for Kenwood & Yaesu
Jumper Placement
for Icom & Radio
Shack
1 HD1 PTT--R1B PTT--R8B
2 HD1 PTT--R2B PTT--R7B
3 HD1 PTT--R3B PTT--R6B
4 HD1 PTT--R4B PTT--R5B
5 HD1 PTT--R5B PTT--R4B
6 HD1 PTT--R6B PTT--R3B