MFJ-1164B Instruction Manual AC Line RFI Filter
2
Figure 1: MFJ-1164B AC Line RFI Filter
WARNING:
DO NOT connect to an ungrounded outlet without
connecting to the chassis ground. Install the AC Filter
away from excessive moisture or where other conductive
contaminants are present. Never install electrical wiring
during an electrical storm.
Getting Started
Installation of the MFJ-1164B is fast and easy:
1. Choose a convenient location
in close proximity of sensitive
equipment that you want to protect. Make sure the location
that you have chosen is cool, dry, and well ventilated.
2. Connect the AC Line RFI Filter
. Plug the AC line cord into a
US Standard 120VAC grounded three-prong utility outlet.
3. Connect the equipment to the AC Line RFI Filter
. Plug the
equipment that you want to protect into any of the four outlets
on the filter. (two- or three-prong AC cords will be protected.)
4. Connect the earth ground.
A good earth ground should be
installed and connected to the case of the MFJ-1164B. This
will provide the best possible performance of the filter as well
as safety for the operator.
5. Mount the filter
, if desired, using the mount tabs on each end
of the filter.
6. A 30 Amp fuse is used
to protect your equipment from a high
current surge. If the fuse should blow in the case of an
electrical storm, transients or surges, replace the fuse with a 30
Amp glass tube type fast blow fuse.