background image

 

 

FULL 12-MONTH WARRANTY 

 
MFJ Enterprises, Inc. warrants to the original owner of this product, if manufactured by 
MFJ Enterprises, Inc. and purchased from an authorized dealer or directly from MFJ 
Enterprises, Inc. to be free from defects in material and workmanship for a period of 12 
months from date of purchase provided the following terms of this warranty are satisfied. 

 

1.

 

The purchaser must retain the dated proof-of-purchase (bill of sale, canceled check, 

credit card or money order receipt, etc.) describing the product to establish the validity of 
the warranty claim and submit the original or machine reproduction of such proof of 
purchase to MFJ Enterprises, Inc. at the time of warranty service.  MFJ Enterprises, Inc. 
shall have the discretion to deny warranty without dated proof-of-purchase.  Any evidence 
of alteration, erasure, of forgery shall be cause to void any and all warranty terms 
immediately. 

 

2.

 

MFJ Enterprises, Inc. agrees to repair or replace at MFJ's option without charge to 

the original owner any defective product provided the product is returned postage prepaid 
to MFJ Enterprises, Inc. with a personal check, cashiers check, or money order for 

$10.00 

covering postage and handling. 

 

3.

  MFJ Enterprises, Inc. will supply replacement parts free of charge for any MFJ 

product under warranty upon request.  A dated proof of purchase and a

 $8.00

 personal 

check, cashiers check, or money order must be provided to cover postage and handling. 

 

4.

  This warranty is 

NOT

 void for owners who attempt to repair defective units.  

Technical consultation is available by calling (662) 323-5869. 

 

5.

 

This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, 

Inc. 

 

6.

 

Wired and tested PC board products are covered by this warranty provided 

only the 

wired and tested PC board product is returned.

  Wired and tested PC boards installed 

in the owner's cabinet or connected to switches, jacks, or cables, etc. sent to MFJ 
Enterprises, Inc. will be returned at the owner's expense unrepaired.   

 

7.

   Under no circumstances is MFJ Enterprises, Inc. liable for consequential damages to 

person or property by the use of any MFJ products. 

 

8.

 

Out-of-Warranty Service: 

MFJ Enterprises, Inc. will repair any out-of-warranty 

product provided the unit is shipped prepaid.  All repaired units will be shipped COD to 
the owner.  Repair charges will be added to the COD fee unless other arrangements are 
made. 

 

9.

 

This warranty is given in lieu of any other warranty expressed or implied. 

 

10.

  MFJ Enterprises, Inc. reserves the right to make changes or improvements in design 

or manufacture without incurring any obligation to install such changes upon any of the 
products previously manufactured. 

 

11.

  All MFJ products to be serviced in-warranty or out-of-warranty should be addressed 

to 

MFJ Enterprises, Inc., 300 Industrial Park Rd, Starkville, Mississippi 39759, USA 

and must be accompanied by a letter describing the problem in detail along with a copy of 
your dated proof-of-purchase and a telephone number. 

 

12.

  This warranty gives you specific rights, and you may also have other rights, which 

vary from state to state. 

Содержание hamProAudio MFJ-654





























Отзывы: