background image

 

MFJ-498 Instruction Manual 

Message Memories 

The MFJ-498 has eight 4000 character message memories.  Each memory is 
represented by a function key, "

F1-F8

".  To play a message simply press a function 

key. 
 
To record a message to memory, press and hold the "

Alt

" key while selecting a 

memory position.  When the MFJ-498 signals the characters "

--.  ---

" or "GO" in 

Morse, it is ready to record the message, which is displayed on the bottom line of the 
LCD readout as it is typed.  At approximately 16 characters before the message 
memory fills, the playback frequency lowers to indicate that memory is short.  
Characters may be removed from memory by using the "

Backspace

"

 

and new 

characters may be entered.  No more than 4000 characters may be stored in any 
message location.  Any attempt to enter additional characters will generate a long, 
low-frequency tone for each character entered.  

To complete the saving of a 

message, press  

"

Enter

".  An end of message character (

.-.-.

) will sound to confirm 

the save. 
 
A programmed message can be replayed by pressing the appropriate function key 
"

F1-F8

"

.

  The keyer will display a lower case character on the top line of the display 

to indicate which message is sent.  The character "a" is displayed for message 1, 
"

F1

"; "b" for message 2, "

F2

"; "h" for message 8 .

 

 
example:  Select "

Alt-F2

"

.  

The keyer signals "

--. ---

" to indicate readiness.  Type the 

message "AA5MT BEACON BEACON 5 W BEACON."  Press "

Enter

" and the 

message is stored at memory location "

F2

".  Select "

F2

" to play message. 

 

Embedded Commands 

While a message is being saved, one or more 

embedded commands

 may be 

added as special features.

 

 

Note:  To use the "Ctrl-L" command

,

 press and hold Ctrl, press and release the 

"S" key, then release the Ctrl

 

key

.

 

Ctrl-L

 creates a repeating message.  Use the "

Ctrl-L

" at the end of the message 

before pressing "

Enter

".  The MFJ-498 will play the message to the point 

where "

Ctrl-L

" is entered an then repeat. 

 

example:  AA5MT BEACON 5 W "

Ctrl-L

  

Enter

".  This message repeats until 

"

Esc

" is pressed. 

Содержание MFJ-498


























Отзывы:

Похожие инструкции для MFJ-498