6
General
Dominion I is a monophonic analogue synthesizer.
Among its most important characteristics are a threefold
oscillator section that can be played paraphonically with
up to three voices, a new designed multimode filter with
twelve operational modes, 128 memory locations, step
sequencer
and
arpeggiator,
versatile
MIDI
and
CV/Gate-control as well as a three octave keyboard
with two ribbon elements for pitch and modulation.
Setup
Dominion I is powered by an internal power supply.
Connect
the
provided
power
chord
to
the
corresponding socket on the unit's rear panel. Find the
corresponding on/off switch alongside.
Make sure to connect the unit's
AUDIO OUT
to a mixing
console, an audio-interface or an amplifier before
switching on. Toggle the aforementioned switch to turn
Dominion I on and off.
In case Dominion I is not played using its keyboard, the
unit is addressed via its MIDI or CV/Gate connectors.
Connect the
Midi IN
input to the MIDI output of a
keyboard or a computer MIDI-interface. Alternatively,
use inputs
CV VCO1
(as well as
VCO2
and
VCO3
) and
GATE
to connect to an analogue sequencer or CV/Gate
keyboard.
Note:
Dominion I uses analogue circuits. It is therefore
recommended to "warm up" the unit for 5 to 10 minutes
to ensure solid tuning.
Содержание DOMINION 1
Страница 1: ...Operating Manual...
