background image

888

 

 

 

Page 8

 

 

 

Scribe EC no Printer Installation Guide 

 

 

Document Revision: 2004/12/28 

 

A picture shows ports of firewire A and B. 

A picture shows a firewire B cable. 

A picture shows a firewire A cable. 

 

Appendix A 

  

DVD8Z-9001EC, DVD8Z-9002EC 

1 and 2 DVD drive system requires only one PCI firewire B controller card  (IEEE-
1394B) to be installed in a host PC.  One firewire B cable is connected between a host PC 
and a drive bay. 
 

DVD8Z-9004EC 

4 DVD drive system requires only one PCI firewire B controller card  (IEEE-1394B) to 
be installed in a host PC.  Two firewire B cables are connected between a host PC and a 
drive bay.  Both of the firewire B cables are plugged into one PCI firewire B controller 
card (IEEE-1394B). 
 

CD-9001EC, CD-9002EC 

1 and 2 CD drive system requires one PCI firewire A controller card  (IEEE-1394) to be 
installed in a host PC.  One firewire A cable is connected between a host PC and a drive 
bay. 

 
CD-9004EC 

4 CD drive system requires two PCI firewire A controller cards  (IEEE-1394) to be 
installed in a host PC.  Two firewire A cables are connected between a host PC and a 
drive bay.  One firewire A cable is connected to one firewire A controller card. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Firewire B (IEEE-1394B) 

Firewire A (IEEE-1394) 

Содержание ScribeEC










Отзывы: