Front
Rear
K
E
Y
Mounting & Connecting Your Prism Plus Printer
with the MF Digital PC Series.
1. Locate the front of the mounting
plate as indicated by the yellow circle
to the right.
2. Slip the groove of the mounting
plate around the white plastic knob.
See picture above (yellow circle).
3. The latch located at the rear of
the mounting plate will line up
with the “U”shaped housing located
on the rear of the MF Digital PC
Series Unit. See picture above (blue
circle).
4. After mounting the Printer, be sure
to push the printer all the way for-
ward then use the latch to
secure the printer to the MF Digital
PC Series Unit.
5. To wire your printer to MF Digital
PC Series please follow the wiring
diagram to the right.
