DIRECTOR EC Series Operator’s Guide
Document Revision: 080904
Page 45
Static And Dynamic Content
The DIRECTOR EC allows CDs to be created from both
static
and
dynamic
content. A finished CD created from
static
content will contain the
exact files and folders that are specified when the disc image is created. A
finished CD created from
dynamic
content will contain the files and folders
that exist in specified locations at the time the job is submitted for
recording (rather than when the disc image is created).
For example, specifying
dynamic
content when creating a CD layout would
allow a job to be run every week that records the contents of a specific
folder onto a CD without having to create a new disc image every time. In
this case the contents of the folder (not the folder itself) can change.
To specify a file or folder on a disc image as containing dynamic content:
•
Highlight the Volume which will be using dynamic source then Click
the
*.*
check box.
Note:
Please be sure not to exceed the capacity of the disc being used.
