Meyra SMART 9.906, Руководство по эксплуатации, Страница: 13 / 68

3
2
1
13
Drive-/push mode
The lever (1) for switching the drive
motors between the drive mode and
push mode is located on the right side
of the electric wheelchair.
!
Attention:
Push the electric wheelchair only
for manoeuvring or in emergency
cases but never on gradients.
The electric magnetic brakes are
switched off in the push mode.
A braking of the electric wheelchair
is then only possible by switching
to the drive mode. Therefore do
not switch to the push mode on
gradients.
Selecting the push mode
1. Switch off the operating module
because the pushing will otherwise
be made diffi cult by the electric
system.
2. Pull the locking sleeve (2) up and
then push the selection lever to
the rear ( 3).
☞
The electric wheelchair can now be
pushed.
Selecting the motor mode
1. Push the selection lever to the
front (1) until it audibly latches.
2. Switching the operating module
on. The electric wheelchair is now
ready for operation again.