background image

   33

WHEN

WHAT

REMARK

Before starting out

General

Test for faultless operation.

Carry out test yourself or 
with a helper.

Before starting out

Test brakes for fault-
less operation

Activate brake lever to the 
limit. 

Carry out test yourself or 
with a helper.
The locked wheels should 
not be able to turn un-
der operating conditions. 
If they can still turn, the 
brakes must be repaired 
by an authorised specialist 
workshop.

Before starting out

Check pressure brake 
for wear 

Move brake lever to the 
side

Carry out tests yourself or 
have a helper do it.
If you notice any increas-
ing slackness on the brake 
lever take the wheelchair 
to your specialist work-
shop immediately for 
repairs.
– Danger of accident!

Before starting out

Check the back tubes 
and frame tubes for 
damages

Carry out the test yourself 
or by a helper.
If deformations or cracks 
occur in the welding 
seams, contact a specialist 
workshop immediately for 
repairs. – Danger of acci-
dent!

Especially before driving in 
the dark
(when applicable)

Check the lighting

Check the light- and indi-
cator signal equipment as 
well as reflectors for im-
maculate performance.

Carry out test yourself or 
with a helper.

Maintenance schedule

Содержание 9.072













































Отзывы: