1
2
3
4
5
39
Retaining strap
The retaining strap [1] serves to hold
a person sitting inside the
SCOOTER
in
place.
– Additional stabilisation of the sit-
ting position.
– Prevents the user from slipping
forwards out of the seat (e.g. dur-
ing abrupt braking).
The retaining strap is screwed onto
the bottom of the seat.
☞
Note:
The retrospective assembly of a re-
taining strap is only to be carried
out by a specialist workshop!
!
Attention:
The retaining strap is not part
of the retaining system for the
SCOOTER
and/or the driver during
transport in a handicapped trans-
port vehicle.
Fastening the retaining strap
Pull both belt halves to the front and
slide the catch halves together so that
they latch together [1].
☞
Afterwards conduct a pulling test.
!
Attention:
Make sure that no objects are
trapped between belt and the
body! – Thus you avoid painful
pressure points.
Opening the retaining strap
To open the retaining strap press the
red unlocking knob (2) inside the
buckle.
Adjustment of belt length
☞
Note:
The retaining strap should not be
pulled too tight.
Push or pull the strap (5) in the respec-
tive direction in order to extend or
shorten the strap.
☞
Therefore hold the lock part or
buckle (3) at a right angle to the
strap.
Fasten excessive strap by reposition-
ing the plastic slider (4).