1
2
3
24
WHEELS
Drive.wheels
The drive wheels are mounted on a
fixed axle (1) or on a quick release
axle (2).
☞
.Note:
The air pressure value for the tyres
of the wheelchair can be read in
the <
Technical data
> or details on
both sides of the tyre cover.
☞
If the drive wheels has too much
sideward lag or the quick release
axle does not engage, contact your
specialist dealer immediately for
repair.
☞
No person may be seated in the
wheelchair during assembly or
removal. The wheelchair should
stand on a level and firm surface.
Before starting the disassembly of
a wheel, support the frame to pre-
vent the wheelchair from tipping
over and secure it to prevent an
unwanted movement or tipping
over.
Quick.release.axle
The drive wheels can be removed and
reassembled without any tools.
– First press the locking button (3) of
the quick release axle in the center
of the hub.
– Afterwards remove or attach the
drive wheel.
!
. Attention:
After inserting the drive wheel the
locking button (3) must stick a cou-
ple of millimetres out of the wheel
nut.
Tyre.damage.on.pneumatic.
tyres
☞
For repairing tyre damage we rec-
ommend the use of a foam car-
tridge that is available in special-
ity shops. – Afterwards look up a
specialist workshop as soon as pos-
sible.
