Meyra 1.620, Руководство по эксплуатации

Страница: 22 / 60

1
2
22
Positioning the operating module
Switch off the operating module before
adjusting/removing it.
Function description
You will find a detailed description of the
keys and symbols in the operating manual
for <
Operating module >.
The position of the operating module can
be adjusted to suit the individual size of the
user. The operating module can also be
removed for transportation or storage and
can be laid on the seat or stored separately.
Adjusting the distance to the padded
arm support
When adjusting the distance of the op-
erating module to the arm support, the
max. extension mark on the telescopic
rod needs to be observed.
Slacken the clamping screw distance ad-
justment (1). Afterwards slide the operating
module into the desired position. In doing
so carefully guide the cable and retighten
the clamping screw (1) securely.
Removing the operating module
In order to remove the operating module
loosen the clamping screw (1) and discon-
nect the plugged connection (2).
☞
Do not pull on the cable while do-
ing so.
Afterwards pull out the operating module
toward the front out of the arm support
tube.
Inserting the operating module
For drive mode insert the operating mod-
ule from the front into the arm support tube
and adjust the distance to the padded arm
support.
☞
Therefore observe chapter Adjusting
the distance to the padded arm sup-
port
on page 22.
Afterwards re-establish the plugged con-
nection (2).
☞
Check the function of the operating
module.