2
1
6
Anchoring the wheelchair
If the wheelchair is anchored correctly, a
control diode ill light up on the operating
module (1) of the docking station.
Further information to the Dahl Docking
Station can be found on the website:
<
www.dahlengineering.dk
>.
To lock the docking station, move the
wheelchair straight and centred over the
anchoring unit (2) on the floor of the motor
vehicle.
☞
If the wheelchair is
not
anchored cor-
rectly, a warning signal sounds and a
warning light appears on the operating
module (1) of the docking station.
☞
If necessary observe the operating
manual of the Dahl-Dockingstation.
Unlocking the wheelchair
To unlock the wheelchair, press the release
key on the operating module (1) of the
docking station and then move the wheel-
chair slowly backwards out of the anchoring
unit (2) on the floor of the motor vehicle.
☞
The procedure e.g. in case of a break-
down of the battery of the motor ve-
hicle can be viewed in the operating
manual of your Dahl-Dockingstation.
Repairs
Use only original spare parts. Make use of
the service of your educated dealer.
DISPOSAL
The disposal must comply with the respec-
tive national law.
Please enquire about local disposal arrange-
ments at your municipal authority.
