Meyra 1.610, Руководство по техническому обслуживанию и ремонту

Страница: 41 / 104

41
Replacing the back light
Model 1.610 / 1.611 / 1.614 / 1.615 / 1.616:
1. In order to replace the back light (1) first disconnect the
electric.
2. Afterwards press down the to springs at the side (2) and
take out the back light.
After assembly of the new back light the electric contact
needs to be re-established.
Model 1.612:
1. In order to replace the back light (3) first remove the
battery lid [4].
2. Afterwards disconnect the plugged connection (5)/(6)
of the defective back light.
3. Press down the to springs at the side (7)+(8) and take
out the back light.
After assembly of the new back light the electric contact
needs to be re-established.
☞
Protect the cable while placing it (9).
3
1
6
5
9
7
8
2
4