Meyra 1.610, Руководство по техническому обслуживанию и ремонту

Страница: 15 / 104

15
Adjusting the angle of the footboard
Swivel the footboard down in order to adjust the angle of
the footboard [1]. Afterwards loosen the screws (2) on
both sides.
Tilt the footplate to the desired angle and retighten the
screws (2) on both sides.
Depth adjustment of the footboard
The depth adjustment of the footboard is done by reposi-
tioning the removable distancer pieces (3).
Lift the loose side of the footboard slightly.
Reposition the desired amount of distancer pieces on the
lifted side.
Pull/press the distancers that are to be repositioned on the
right side of the footboard outward from the retaining
rod [4].
☞
Note:
In certain angle settings of the footboard it is possible
that a removal or placing of certain distancer pieces is
not possible. Then fold up the footboard.
Reposition the footboard and insert the distancer pieces
back again as far as possible to the right retaining rod.
Swivel the footboard down and hook it into place.
3
2
1
4