Meyra 1.610 MC1, Руководство по эксплуатации

Страница: 23 / 88

2
1
3
4
23
Positioning the operating module
Switch off the operating module before
adjusting/removing it.
Function description
You will find a detailed description of the
keys and symbols in the operating manual
for <
Operating module >.
The position of the operating module can
be adjusted to suit the individual size of the
user. The operating module can also be
removed for transportation or storage and
can be laid on the seat or stored separately.
Adjusting the distance to the padded
arm support
Switch off the operating module before
adjusting/removing it.
The maximum extension reached, when
a mark becomes visible in the receptacle
tube of the operating module.
Slacken the clamping screw distance ad-
justment (1). Afterwards slide the operating
module into the desired position. In doing
so carefully guide the cable and retighten
the clamping screw (1) securely.
Removing the operating module
In order to remove the operating module
loosen the clamping screw (1) and discon-
nect the plugged connection (2) (4).
☞
Do not pull on the cable while do-
ing so.
Afterwards pull out the operating module
toward the front out of the arm support
tube.
Inserting the operating module
Watch for possible jamming areas when
plugging in the operating module..
For drive mode insert the operating module
from the front into the arm support tube [3]
and adjust the distance to the padded arm
support.
☞
Therefore observe chapter
Adjusting
the distance to the padded arm sup-
port
on page 23.
Afterwards re-establish the plugged con-
nection (4) (2).
☞
Check the function of the operating
module.