1
18
24".DRIVE.WHEELS
The drive wheels are on a quick re-
lease axle.
☞
No person may be seated in the
shower wheelchair during assem-
bly or removal. The shower wheel-
chair must stand on a level and
firm surface. Secure the shower
wheelchair against unintention-
ally rolling away before removing
a wheel.
Quick.release.axle
The drive wheels can be removed and
reassembled without any tools.
– For this first unlock the quick re-
lease axle by pressing the spring
button (1), then pull the drive
wheel off toward the outside.
To replace the drive wheels unlock the
respective quick release axle by press-
ing the spring button (1) and press it
as far as possible into the axle recep-
tacle.
!
. Attention:
After inserting the drive wheel the
locking button must stick a couple
of millimetres out of the wheel
nut.
☞
.Note:
☞
After each assembly the locking
device is to be checked with side-
ward pulling/pressing on the drive
wheels!
☞
The locking bolt is to be kept clean.
A functional fault may occur in the
case of contamination due to sand
or earth or in the event of freezing
of moist cold air.
☞
If the drive wheels has too much
sideward lag or the axle does not
engage, have it maintained imme-
diately by the specialist dealer.
