Meyn 0100-5, Руководство пользователя и по обслуживанию

Страница: 29 / 58

Cleaning
© Meyn Food Processing Technology B.V. 27
5.2.3 Disinfection
Alkaline foam cleaning alone does not lead to a complete killing and removal of
bacteria, fungi, viruses, algae and yeasts. For that purpose a separate disinfectant is
needed. Disinfect the machine daily, after the alkaline foam cleaning.
• Disinfection only makes sense when the surfaces are visibly clean after the alkaline
foam cleaning.
• Spray the disinfectant onto the machine and surrounding area. When disinfecting,
it is difficult to judge just how thorough you have been.
• We advise you to disinfect the machine and the area immediately surrounding it in
an established pattern.
• After applying, the remaining foam rests should be removed by means of
high-pressure water jet.
For disinfection use the following equipment:
• A fixed piping system.
• A spray lance with downward-bent top.
• A spray nozzle of the flat-jet type, with a spray angle of 15° to 25°.
• The used disinfectant should not affect the materials which it will contact.
Consult your detergent supplier to know which detergents will fulfill these specific
requirements and which cleaning directions to follow. Obey these instructions.
Incorrect application may be dangerous.
Damage may be caused by not thoroughly rinsing the disinfectant.
Evaporation of chlorous drops will lead to a very high concentration of chlorine.
In combination with long contact-times can cause corrosion to metals.