Table of Contents
General Information ............................................................................................................................................................................. 1
Illustrated Parts Lists ..........................................................................................................................................................................2-4
Attaching Plow to EZ Build Assembly ............................................................................................................................................. 5
Vehicle Side Wiring Diagram.............................................................................................................................................................. 6
Stop Bolt Adjustment ........................................................................................................................................................................... 6
Mount Plow System To Vehicle ......................................................................................................................................................... 7
Dis-Mount Plow System From Vehicle ............................................................................................................................................ 8
E-73 Hydraulic Unit Drop Speed Adjustment, Wiring and Accessories ............................................................................... 9
Pre-Delivery Inspection ..................................................................................................................................................................... 10
Web Based Support
(1)
GENERAL INFORMATION
Always disconnect battery prior to installation.
SAFETY PRECAUTIONS should be used when Quik Lift
®
is in a
RAISED
position
.
LOWER
plow to the ground when vehicle is PARKED.
OVERHAUL
and SERVICE information is covered on separate instructions.
Lift arm should be removed from vehicle if / when snowplow is removed.
Note:
1. Connect ground cable to negative side of battery for a solid connection to ground.
2. Route all cables away from moving engine parts, Manifolds, and sharp sheet metal.
3. For weather protection, coat all connections with Meyer Dielectric Grease Part No. 15632
4. The vehicle must be equipped with a “Heavy Duty Battery” (70 Amp, Hr. Min.), 550 C.C.A. and “Alternator” (60 Amp. Min.) to obtain
maximum performance
.
5. Follow these instructions explicitly. Warranty does not apply to a Meyer product which has been negligently or improperly assembled
or installed .
Please check the contents of your crate. Page 2 shows the assembled parts in the
left hand column and the accessory box in the right hand column. Page 3 is the
diagram for the left hand column of page 2.
Bolt Nut Size Gr. 2
Gr. 5
Gr. 8
1/4 - 20
4 - 5
5/16 - 18
9 - 11
3/8 - 16
17 - 20
26 - 29
7/16 - 14
42 - 46
60 - 66
1/2 -13
64 - 72
90 - 100
5/8 - 11
127 - 141
179 - 198
TORQUE CHART FOOT POUNDS
ADDITIONAL BATTERY CONNECTIONS
1. When attaching cables to battery with side post terminals, use M.P. Adaptor
Part #21976.
http://www.meyerproducts.com/
TechSupport/ServiceManualsandIn-
stallationInstructions.aspx
http://www.meyerproducts.com/
techsupport/EZtroubleshooter.aspx
http://www.meyerproducts.com/
TechSupport/OwnersManuals.aspx
http://www.youtube.com/playlist?list
=PLDE0602B305314D92&feature=e
dit_ok
Service Manuals
EZ-Troubleshooter
Owners Manual
Mount/Dismount Videos
Please visit our website to find our most updated technical information.
Tool list for Plow assembly:
Pliers
1/2" socket
1/2" box wrench
9/16" box wrench
9/16" socket
3/4" box wrench
15/16" box wrench
15/16" deep well socket