Meyer F585 2018 Скачать руководство пользователя | Manualshive

Страница: 3 / 92

background image

1-800-325-9103

Formula Mixer Check List

- 3 -

www.meyermfg.com

2.0 PRE-DELIVERY & DELIVERY CHECK LIST

This Pre-Delivery & Delivery Check List must be gone through by the Selling Party and the Customer to validate the
Owner’s Registration Form.

Meyer Manufacturing Corporation

Phone: 715-654-5132 • Toll-Free: 1-800-325-9103 • P.O. Box 405 • Dorchester, WI 54425

PB Mixer Check List

All shields and guards are in place and securely
fastened.

All PTO shields turn freely.

All bolts and other fasteners are secure and tight.

All mechanisms operate trouble free.

All grease fittings have been lubricated, gear
boxes filled to proper levels, and all roller chains
are oiled. See “Lubrication” section of this
manual.

All decals are in place and legible.

All stop/tail/turn lights work properly.

PRE-DELIVERY CHECK LIST

After the New Meyer Mixer has been completely set-up,
check to be certain it is in correct running order before
delivering it to the customer.

The following is a list of points to inspect:

Check off each item as you have made the proper
adjustments and found the item operating
satisfactorily. Any adjustments made, MUST be
according to specifications defined in this manual.

DELIVERY CHECK LIST

The following check list is an important reminder of
valuable information that MUST be passed on to the
customer at the time the unit is delivered.

Check off each item as you explain it to the
customer.

Explain to the customer that pre-delivery check
list was fully completed.

Give customer the Owner & Operator’s Manual.
Instruct to read and completely understand its
contents BEFORE attempting to operate the
mixer.

Explain and review with customer the New Meyer
mixer manufacturer’s warranty.

Show the customer where to find the serial
number on the implement.

Explain and review with the customer “Safety
Precautions” section of this manual.

Explain and review with customer the proper
“Start-up and Operating Procedures” sections of
this manual.

Explain and review with customer the
recommended loading and unloading
procedures.

Demonstrate the start-up and shutdown controls.

Explain that regular lubrication and proper
adjustments are required for continued proper
operation and long life of the mixer. Review with
the customer the “Lubrication” and “Adjustments”
sections of this manual.

Fully complete this “PRE-DELIVERY &
DELIVERY CHECK LIST” with the customer.

«
1
2
3
4
5
...
»

Содержание F585 2018





























































































Отзывы:

Нет отзывов

Похожие инструкции для F585 2018

Бренд: Monacor Страницы: 14

Бренд: UNITED Страницы: 3

Бренд: Kemar Страницы: 62

Compact 6.2 D2320

Бренд: DAPAudio Страницы: 16

JSM900EAAU - Jenn-Air Attrezzi Antique Copper Stand...

Бренд: Jenn-Air Страницы: 56

Бренд: Pronomic Страницы: 6

Бренд: Mackie Страницы: 12

KHM3WH - Hand Mixer

Бренд: KitchenAid Страницы: 3

ALGIMIX 452 045

Бренд: HAGER WERKEN Страницы: 2

Бренд: NOVIK Страницы: 36

Бренд: Rane Страницы: 4

Бренд: IBE Страницы: 21

Бренд: Altman Страницы: 4

Бренд: Russound Страницы: 144

Бренд: AUSTRALIAN MONITOR Страницы: 7

Бренд: AUSTRALIAN MONITOR Страницы: 12

Бренд: Imetec Страницы: 52

Power Advantage HM-8GRP1

Бренд: Cuisinart Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды