Meyer Sound HMS-10 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 40

Meyer Sound HMS-10 Скачать руководство пользователя страница 19

HMS OPERATING INSTRUCTIONS

19

HY-HMS-15 Half Yoke

(PN 40.242.035.01)

Suspends HMS-15 and
HMS-15AC loudspeakers with a
full range of tilt (360°). The yoke
can attach directly to ceilings or
can accept “C” or “G” hanging
clamps with standard 1/2-inch or
12 mm bolts.

■

HMS-15: 360°

■

HMS-15AC: 360°

7.6 lbs

(3.4 kg)

Yes

MUB-HMS U-Bracket

(PN 40.227.032.01)

Mounts HMS-5, HMS-10, and
HMS-12 loudspeakers on walls
and ceilings with uptilt or down-
tilt. The U-bracket includes three
loudspeaker attachment points
for placing the loudspeaker
closer or further from the mount-
ing surface. The available tilt is
determined by which HMS loud-
speaker model is mounted and
which attachment points are
used.

■

HMS-5: +60°/–43°

■

HMS-10: +32°/–25°

■

HMS-12: +23°/–20°

Note:

Wider uptilt and

downtilt may be possible
depending on the building’s
structural components and
mounting surface.

13.5 lbs

(6.1 kg)

Yes

Table 4: HMS Mounting Options

Model (Part Number)

Features

Maximum Uptilt/Downtilt

Weight

Rated for

Overhead

Mounting

«
...
17
18
19
20
21
...
»

Содержание HMS-10









































Отзывы:

Нет отзывов