Meyer Sound Galileo GALAXY 408, Руководство пользователя

Страница: 41 / 84

GALILEO GALAXY USER GUIDE
41
Output Processing Tab
Similar to the Input Processing tab, the Output Processing tab (Figure 19) allows a user to visualize and edit output channel
equalization and settings. The upper part of the display is the plotter, the lower part the control. The plotter plots gain (left
vertical axis) and phase (right vertical axis) against frequency (x-axis). If gain and phase happen to align, that situation is
purely coincidental. Two select buttons on the top control whether the display is dual (two channels simultaneously) and
whether or not to show the settings control mini tabs. When selected, three mini tabs will appear to the right of the display:
Plotter, Handles, and Response:
•
The Plotter mini tab allows control of the number and arrangement of plotters, what to display or hide, and provides
some axis control.
•
The Handles mini tab controls the display or removal of EQ handles in the plotter.
•
The Response mini tab controls whether to display or hide specific response curves in the plotter.
The mini tabs can be hidden from view by using the right/left blue arrows on the bottom right of the mini tab.
The bottom part of the display enables output processing control. This part of the display may be minimized by clicking on
the up/down arrow under the Plotter display. Within the control area under the Output Processing tab, a user may select the
processing desired for each input. Possible processing includes Gain, Delay, Polarity reversal, 10-band Parametric EQ,
5-band U-Shaping EQ, Low-Mid Beam Control, atmospheric correction, simultaneous high- and low-pass filtering and All
Pass filtering.
This window has four tabs near the bottom left of the screen to control the processing parameters: Channel Settings,
Parametric, U-Shaping, and All Pass.
Figure 19: Processor > Output Processing > Channel Settings and Parametric tabs