1. All MS-CONSTELLATION processors. These processors include an LX-ELC module and an
LX-COS module.
2. All MS-VRAS processors. These processors include an LX-VRA module in place of an LX-EXP
module.
3. All MS-EXPANSION processors. These processors have two LX-EXP modules, and do not
have either an LX-ELC module or an LX-COS module.
Each processor can be mounted directly below the one above it, there is no need to leave any
rack spaces empty between processors. Once all of the processors have been mounted in the
rack, connect the IEC power cable between the processor and a power outlet.
CAUTION:
Do NOT power-on any of the processors until you have completed all of the
steps in both the section called “Linking Processors” (p. 23) and the section called “DSP
ID Settings” (p. 23). Powering on the processors before you have completed all the
necessary steps could result in corrupted firmware.
22
CHAPTER 5: CONSTELLATION PROCESSOR INSTALLATION
