Meyer Burger BS 820 Скачать руководство пользователя страница 76

Страница: 76 / 89

10002683-en-00

BS 820 - Packing and transport

10.2

Transport

10.2.1

Notes

The machine stand and transport fixture are built in such a way that the transport moving
gear can be positioned directly under the machine.

The machine can be lifted with a hydraulic jack or crane.

The machine is lifted by shackles as in Fig. 10-1/1 if lifted by a crane.

The machine is moved to its final location with the transport moving gear

as in Fig. 10-1/2 and 3.

The eye bolts are used to lift the electric cabinet with a crane.

Note:

The user must make sure that ropes, hooks, lifting equipment etc. comply

with the necessary safety regulations, or meet them!

NOTICE

Damage possible!

The fall adjustment securing screws must be fitted

when the machine is being transported!

NOTICE

Damage possible!

Place the hydraulic jack only against the machine stand

and protruding part.

NOTICE

Damage possible!

Never lift by other machine parts with fork lifts, ropes or hooks.

Safety regulations

please see chapter

”3.”

on side 15ff

Machine dimensions and weight:

please see chapter

”4.2”

on side 27

Installation site / ambient conditions

Содержание BS 820


























































































Результаты поиска

Содержание BS 820

Отзывы:

Похожие инструкции для BS 820

Бренды по названию

Популярные бренды

Meyer Burger BS 820, Руководство пользователя

Результаты поиска

Содержание BS 820

Отзывы:

Похожие инструкции для BS 820

Бренды по названию

Популярные бренды