Meyer Burger BS 820, Руководство пользователя

Страница: 16 / 89

16 10002683-en-00 BS 820 - Safety
3.2 Intended use
The Band Saw BS 820 is designed for the automatic slicing of long rods
of hard and brittle materials, mainly semiconductor material.
The special holding equipment for holding the rod in the machine allows the material
to be sliced up into
■
ingots (sections)
■
wafers
■
end pieces
Minimum kerf loss, high accuracy and surface quality are achieved using procedures
with the band saw (diamond tool).
The machine can be operated only in a closed air conditioned room which all staff and
all visitors are entitled to visit only when wearing working clothing and safety shoes.
Any use different from or exceeding this is not regarded as intended use.
The manufacturer/supplier is not responsible for any damage arising from this.
The user alone is responsible.
The intended use of the machine at its installed site also includes following
the operating manual and complying with the inspection and maintenance conditions.
3.3 Dangers to life and limb and material values
The machine has been built according to the state of the art and the recognised
safety regulations. Nevertheless, dangers to life and limb of the user or third parties or im-
pairments to the machine and other material values may occur when using the machine.
NOTICE
This signal word is used as a warning of material damage.
Wear eye protectors
Warning about hand injuries caused by movement of the saw band
Warning of dangerous electrical voltage