MEWOI MEWOI2600, Руководство пользователя, Страница: 11 / 17

-8-
button to shut down, if the POWER indicator flashing or darkening
after power on, it is possible that battery voltage is low, please
replace the battery. After the detector is switched on for 5 minutes,
the
POWER indicator is flashing continuously, indicating that the
detector will automatically turn off, and the POWER indicator will
blink continuously for 30 seconds to shut down automatically to
reduce battery consumption. If the
POWER indicator blinks
continuously, press the POWER key to continue working
3. Data Maintenance
Under normal testing mode, press Left Arrow button to
keep LCD display, “
HOLD
” symbol displays. Press
Left Arrow
button again to release data lock, returning to normal testing
mode, and
“
HOLD
” symbol disappears.
Data Storage Data Reference
4. Data Memory
Under normal testing mode, press Left Arrow to hold and
store the data, at the same time, Meter will automatically form
serial numbers, and memory the current preserved data. This
meter can memory 9999 groups of data, in case of full storage,
“
FULL
” symbol will display by flash continuously, and it cannot
continue to memory until cleaning out the previous memory.
5. Data Reference
Under normal testing mode, press Right Arrow button for
to enter data reference mode, display
ing “
RD
” symbol,
meanwhile, it will automatically display data saved in the group
0001. Press the left and right arrow keys to move the cursor
"+1, - 1, +10, - 10, +100, - 100" to select the appropriate step
amount, Then press
MEM button to read the stored data by