
Adapter setting:
The operating mode selector 1 of the adapter must
be set at position
. The pilot lamp 2 on the
adapter does not light up.
Camera and flash unit settings
For the camera and mecablitz settings, please refer
to Section 5. and 6.2 of the operating instructions
for the "SCA 3083 digital" adapter.
8. Slave mode of the Metz Remote System
8.1 General description
The slave mode of the Metz Remote System is a
cordless remote control of one or more off-camera
slave flash units by a camera-mounted master
flash (controller). The slaves are controlled by the
duration of the flash from this controller.
The slave flash unit must operate in TTL mode.
ISO and aperture value do not have to be set
on the slave.
If the aperture setting is changed on the camera
when in cordless Metz remote flash mode, then
this will have no influence on the LC-display of the
slaves. However, this is irrelevant because expo-
sure is always completed with the aperture set on
the camera.
☞
18
702 47 0075.A3 15.09.2005 10:02 Uhr Seite 18
Содержание SCA 3083-M2 digital
Страница 92: ...92 702 47 0075 A3 15 09 2005 10 02 Uhr Seite 92...
Страница 93: ...93 702 47 0075 A3 15 09 2005 10 02 Uhr Seite 93...