25
24
7. Metz cordless TTL remote operation
Fig. 17: Settings for TTL remote operation
Setting procedure for Metz TTL remote operation:
• Adjust the camera to TTL mode, as explained in the manufacturer’s Operating
Instructions.
1
Switch on the flashgun mounted on the camera with the main switch
.
2
Set the operating mode selector
to
TTL
.
3
Press the
Remote
button
on the flashgun mounted on the camera.
4
Use the „
+
“ button
to select the controller address
Co 1
or
Co 2
.
•
Fit each slave with an SCA 3080 Slave Adapter, switch on with the main switch
,
and set the operating mode selector to TTL: The slaves are now in slave mode.
5
Press the manual firing button
on the flashgun mounted on the camera and
fire a test flash.
•
The slave unit responds with a delayed flash, thus confirming that it is ready
for operation. If several slaves are used at the same time, all will react simul-
taneously. The LC display indicates SL 1 or SL 2, depending on the controller
address selected (Fig. 17). If, after a test flash has been fired, proper function
is not confirmed by one of the slave units in the form of a delayed flash, then
the sensor
in the SCA adapter has not received any light pulse. Should this
be the case, rotate the rotary base
of the flash unit so that the sensor
can receive a light pulse, and repeat step 5.
7. Metz cordless TTL remote operation
50 MZ-5
50 MZ-5
50 MZ-5
Slave
Controller
adj. to TTL
SCA 300 D
only with
SCA 312/2AF
SCA 332/2AF
SCA 333/2AF
SCA 346/2AF
SCA 356
SCA 374/2AF
SCA 381/2AF
SCA 300 D
only with
SCA 312/2AF
SCA 332/2AF
SCA 333/2AF
SCA 346/2AF
SCA 356
SCA 374/2AF
SCA 381/2AF
SCA 3_ _
TTL remote operation
Controller
Slave
SCA 3_ _
Controller
adj. to TTL
SCA 3_ _ _
40 MZ-1(i)
40 MZ-2
40 MZ-3(i)
auf TTL
40 MZ-1(i)
40 MZ-2
40 MZ-3(i)
auf TTL
40 MZ-1(i)
40 MZ-2
40 MZ-3(i)
adj to TTL
SCA 3_ _ _
SCA 3080
Here, „remote operation“ means cordless firing of additional (slave) flash-
guns. The master flashgun (controller) mounted on the camera controls the
additional flash units (slaves) in such a manner that automatic exposure
control in TTL mode is extended to all slaves.
The Metz TTL remote operation permits joint cordless TTL flash control of several
40 MZ-.. and 50 MZ-5 flash units. For this purpose all slaves must be fitted with an
SCA 3080 Slave Adapter which is available as an optional extra. The slaves can be
mounted on the stand supplied with the SCA 3080 or on a tripod.
Ǻ
1
2
5
3
4
