Metz MECABLITZ 34 AF-3 P, Руководство по эксплуатации

Страница: 28 / 108

28
6. Flash in the individual camera modes 7. Autofocus measuring flash
If the mecablitz is switched on and ready for firing,
a flash will be fired each time the camera's shutter
is released. The amount of light is controlled by
TTL.
Triggering lock (only SF1 and SFx)
On the Pentax SFx and SF1 cameras, the flash will
not be fired when the prevailing light is sufficient
for an exposure in normal mode. The exposure is
then completed with the shutter speed indicated in
the display field.
If you intend to take a shot with a shutter speed
faster than e.g. 1/250 sec. (depending on the
camera model) you must switch off the flashgun.
Refer to the camera's operating instructions for
details.
The integrated AF red-light beam of the mecablitz
supports the automatic focusing of autofocus TTL
cameras. When the prevailing light is insufficient
for automatic focusing, the mecablitz will project a
pattern of red vertical stripes onto the subject as
soon as the camera's shutter release is lightly tou-
ched.. The camera’s autofocus system then focu-
ses the picture by this striped pattern.
ķ
Fig. 5: AF red-light beam
AF red-light beam
798 47 0049-A1 34 AF-3 P 27.05.2008 16:43 Uhr Seite 28