EWIO
2
User Manual
V 1.1 | Stand 10/2020
Seite 75 von 96
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Germany
Tel. +49 7702 533-0 | Fax +49 7702 533-433
For additional documentations look at www.metz-connect.com
NNN-NNN to search from NNN to NNN (to define an exact range).
The default is 1 - 250 in the input field. This means that all valid addresses are searched.
After clicking the action field "New search" the search is started. A display field will appear
that shows the progress.
By clicking the action field "Cancel" a search can be terminated.
In the display field of the search address the search progress can be followed.
When the search is complete, all counters found are listed.
The table shows the MBus-ID and the baudrate and the status, if it is a new found or already
known counter.
By clicking the action field "Known counters" the counters are listed, which were found during
the last search.
Use the slide switch to add a new counter to the list in the "Overview" menu window if the
entries in the next "Edit counter" menu window have been completed with the "Done" action
field.
In the input field the primary address can be entered or changed. Valid primary addresses
range from 10 to 250.
Clicking the "Next" action field opens the "Edit Counter" menu window, which is described in
Chapter
Modbus:
Select "Modbus" and click on the "Next" action field to open the window for setting up the
counter.
