METVISA LQ.10 Series, Инструкция по эксплуатации

Страница: 10 / 20

10
5. Cleaning and Maintenance
5.1 Cleaning Procedures and Products Used
Your equipment is built with first-line materials, so use it correctly and you will get great
satisfaction. Keep your equipment always clean and well taken care of, as this will make it have a
much longer shelf life.
A daily cleaning of the machine must be carried out for good operation and durability.
ATTENTION!
Before performing maintenance or cleaning, make sure that the on/off switch is in the "0"
(off) position and the plug is disconnected from the power grid.
ATTENTION!
Do not use a water jet to clean the appliance.
IMPORTANT
This equipment is not intended to be fully immersed in water for cleaning.
Follow the instructions below to find out which parts can be immersed and the special care
to be taken with the other parts.
To remove heavier dirt from the cup, follow the instructions below:
1. Insert the cup into the coupling and cup holder;
2. Add lukewarm water and a few drops of neutral detergent into the glass;
3. Place the cover and turn the device on for a few seconds;
4. When the appliance is turned off, remove the cup from the holder and rinse in running water.
The removable parts (cover and top cover) must be removed from the appliance and washed
with neutral soap and water. Clean the corners thoroughly, eliminating food residue.
The rest of the appliance should only be cleaned with a damp cloth as many times as possible
to prevent food residues from drying out and sticking to the parts. Dry all cleaned parts with a soft, dry
cloth.
Never use abrasive products or sponges and substances containing acids or chlorine to clean
the metallic parts, as they may scratch or damage the surface of the parts causing corrosion points.
Do not spill water on the engine and electrical parts for cleaning, otherwise, turning it on may cause
electric shock or even burn the device.