METVISA BIMG RDA Series, Инструкция по эксплуатации

Страница: 9 / 20

9
WARNING!
The installation and the place where it will be set must comply with the rules of prevention
of risk and safety at work (Regulatory Standard NR-12 for Brazil or according to regulatory
standard present on your country).
The manufacturer is not responsible for possible direct or indirect damages caused by the
non-compliance of the said rules and other instructions in this manual.
3.2 Electrical Connection
The device is supplied with a power cable to be connected to an electrical outlet. If the power
cable is damaged, it must be replaced by a new cable. The exchange must be carried out by the
manufacturer, dealer or qualified person in order to avoid risks.
The power cord plug varies depending on the country. The installation of the device must be
done by a technician qualified for this function and always observing the current regulatory standard
of the country, in special about ground connection (if applicable).
It is supplied with the device an Equipotential Grounding Terminal (Terminal Block), located on
back of the base .