- 10 -
Turning On/OFF the Device
To Turn ON/OFF the device, Press and hold the On/Off
button for one (1) second to turn on the device and hold for
three (3) seconds to turn it off.
1. The most recently selected treatment time and program
will display on the screen
▲
Note
: When stimulating the muscles of the arms or legs
bear in mind that the muscle contraction may
cause involuntary limb movement which could
cause injury to you or others. Always make sure
that the limb is secured to prevent movement.
2. The device turns off automatically after the therapy
session time has elapsed.
▲
Note
: In an emergency you may also pull the
connector(s) from the device and then remove the
electrodes.
▲
Note
: To prevent unpleasant electric shocks, never
remove the device or electrodes while it is still
turned on.
Selecting TENS/EMS Treatment Mode
1. Press MODE, the preset (default) therapy mode
TENS/EMS will display on the screen.
2. Use the button Up +, or Down –, for choice of therapy
mode.
3. Press Mode again, the numeric number of program is
then flashing.
Press the button Up + (to increase) or the button Down –
(to decrease) for choice of program of the selected
modality.
4. Press MODE again to save your selection.
▲
Note
: If you change programs during the course of a
therapy session, the treatment time will not reset
unless you manually reset it by performing the
steps described above.
