www.mettatec.com
Do this for both the Drone / Rover and the Ground Base when using the Reach
RS2 base.
Imagen: Pantalla de Configuración de GNSS con satélites seleccionados y frecuencia de 10Hz.
2.
Go to
REACHVIEW 3> LOGGING
and enable
RAW DATA
with
UBX
.
It is
recommended to activate the option to start automatic registration (Autostart)
:
the UBX registration will start each time the module is successfully powered up.
Image: Registration screen with the Autostart function activated and recording in UBX format.
3.
Go to
REACHVIEW 3> CAMERA CONTROL
and manually take a photo using the
Photo Shoot button located on the remote control of the Drone Phantom 4. The
value in the
CAMERA EVENTS: LAST TIME MARK
field should update at this time.
You can take several photos to verify the proper functioning of the Time Stamp
capture and registration system.
