Made by ALL Engineering
is a trade mark of Roon labs
•
I2S output
: The I2S connection is probably the best way to connect digital audio equipment
over short distances without intervention of all kind of interfaces like AES/EBU , spdif or
Toslink. However still I2S is no international standard in terms of ruggedising the format or
the connectors used. The I2S standard is optimized as an interconnection between Metrum
Acoustics products but will work in most cases in conjunction with other gear. If your
Metrum Acoustics product has the I2S option installed you can use a simple UTP cable to
connect both devices.
•
Mains inlet:
Use a power cable to a grounded power outlet.
Operation
•
On/standby switch :
By default the Ambre will startup as soon the mains cable is connected.
In cases that the Ambre is in a hide location there is no need to switch it to “On” Still it can
be switched to “Standby” when needed. If the Ambre is switched to “Standby” the red led
will lit.
Remark:
The Ambre is not visible in the local network or by the Roon server when switched
to standby!
•
Starting up procedure:
When the Ambre is switched to “On” it will show you a flashing blue
light for max. one minute. During this period the Ambre is starting up all routines to connect
to the Roon music server.
