- 7/19 -
3 – SETTING UP OVERVIEW
3-1 Unpacking
The Calypso Reference has been packed into three cartons:
1. Calypso Reference CD transport unit :
Small cases with Accessories
x 1 Black metal Remote Control RC1 with 2 batteries CR2025 type
x 1 Delrin® CD clamp,
x 1 Key to dismount the remote control to change the batteries,
2. One Farad Power Supply (Elektra):
Power cord,
Very Hugh Quality 16 wires cord between Calypso and Elektra Power
Supply.
3. Silent Base:
x 3 Stainless steel balls,
x 3 Stainless steel cylinder to apply under Delrin feet.
x 3 curved stainless steel cylinder.
Carefully unpack the units: take care that you may need the help of a second person to lift
it. Carefully preserve packages and protections. They will be useful to properly pack the
unit any time shipment is needed. It is the best protection to preserve the unit from damage
or delay. Please note that the warranty will be considered as cancelled if the dispatched
units are packed incorrectly.
3-2 Positioning
Set down the Calypso on the silent base support. Do not put it straight down a carpet or
any flammable material. Connect the Calypso to its Elektra power supply and be sure to
turn off the power of all components before making connections and connect securely to
prevent noise.
Connect the power cable to the wall outlet.
