Metronic Digi-Scart, Инструкция по эксплуатации

Страница: 9 / 24

9
info@metronic.com
Option 2
You are able to receive national channels in analogue and you have no idea
about what you can receive in digital quality.
If you are certain that you can receive additional channels, but you do
not know which network is used for these channels, we advise that
you do the following :
Find an UHF antenna with high gain (at least 15 dB) and connect it to
the ANT input of the
receiver . Adjust the antenna so it is in the same
position as the previous one and start an automatic channels search
(
Go to MENU / Settings / Installation / Automatic Search ).
If you find channels that you were unable to receive with your previous
antenna, simply replace it with the new one. Otherwise, swivel the antenna 1/8
of a turn and start another automatic search. As long as you do not find any
channels, continue the same process. You should end up receiving at least
a few channels.
• Select one of the new channels received.
• Go to MENU
/ Settings / Installation / Manual Search
• At the bottom of the screen, you can view the reception level and quality .
• Turn the antenna to optimise the quality and level (quality must be
at least good ).
• Screw the antenna tightly.
• Press EXIT to go back to the previous menu.
• Make an automatic search (Go to MENU /
Settings / Installation /
Automatic Search ).