Metronic 450907, Руководство по установке

Страница: 5 / 24

4 5
5 - Step by step rotation
If your receiver has the step-by-step rotation, you will be able to adjust
accurately the motor position. If it is not the case, try to reach as pre-
cisely as possible the desired angle with a continuing rotation. It is use-
ful to keep the degree order precision.
6 - Give a number to a satellite
Check in your receiver user manual how to associate a number to each
satellite. If it is not possible, leave the existing number system.
7 - Store a satellite position
This function is generally called
memorised, store, saved
…
8 - Display the signal indicator
Generally, the signal indicator appears when pressing on the INFO key.
Sometimes, you have to access the channel search menu. The indicator
is often showed as two bars. For the alignment, you need to maximise
the signal then, when it is going up, optimise the quality. If the level is
high, but the quality is not going up, that means that you are on another
satellite, you must continue to scan.
The level is always measured on a give channel. So, we will define, for
each satellite, a «reference channel» as the channel used to find this
satellite. The following table lists a set of reference channels. With time,
it is possible that one or more of these channels is no longer broadcast
or has its technical data change. If so, choose any other channel of the
satellite as a reference channel, provided that the Symbol Rate (SR) is
bigger than 22000.
reception level.
Note: The size of the level indicator does not have a real importance in
itself. What is important it is the variation when you move the dish
or the motor. When the level is going up a bit, stop the rotation to
check if the quality level increases.