Wall plug overheated (no charging); restarts charging automatically when it cools down;
applies only to versions with wall plug integrated over-temperature protection
Slow blinking 5 times (plugged in or not plugged in)
Slow blinking 6 times (plugged in or not plugged in)
Slow blinking 7 times (plugged in or not plugged in)
Slow blinking 8 times (plugged in or not plugged in)
Leakage current detected by built-in RCD (charging stopped); unplug to reset
RCD self test failed (charging not allowed), station fault
Rapid blinking (plugged in or not plugged in)
Station or vehicle fault
One or more power contact welded (charging not allowed), station fault
TECHNICAL SPECIFICATIONS
Type 2 (IEC 62196)
Female Socket
Type 2 (IEC 62196)
Female Socket
Type F/E (Schuko), CEE, Type G (UK),
Type J, Type H, Type B, …
CEE 32A (3-phase/3P+N+E),
CEE 32A (1-phase/2P+E), …
32A (1-phase)
6/8/10/13/16 A or
6/8/10/13 A
6/8/10/13/16/20/25/32 A
3,7 kW or 3,0 kW
7,4 kW
230 Vac (1-phase)
230 Vac (1-phase)
from 90 V to 270 V
(50/60 Hz)
from 90 V to 270 V
(50/60 Hz)
yes
yes
yes (all parts)
yes (all parts)
from -30°C to +50°C
from -30°C to +50°C
IP67 (100% water proof)
IP67 (100% water proof)
1 kg / 47 cm x 7 cm max.
16A for Schuko with overtemp.
prot. & CEE plug (1-phase); 13A
for all other plugs (1-phase)
1 kg / 47 cm x 7 cm max.
PC04X
PC03X
IK10 (impact/shock proof)
IK10 (impact/shock proof)
yes
yes
yes
yes
EV Side Socket Type
Wall socket/grid side Standard Plug Types
Max. Charging Current
Possible charging current settings
Max. Charging Power
Rated Voltage
Operating voltage/frequency range
Wall plug integrated OVER-TEMPERATURE PROTECTION
Power contactor weld detection (although very unlikely
to occur due to special contact weld protection system)
Internal self-resetable overtemperature protection
UV resistance
Operating Ambient Air Temperature Range
IP Rating
IK Rating
Drive-over proofness
Automatic RCD self-test
Weight / Dimensions
Integrated ground fault protection device (RCD)
optional
optional
yes
30mA AC + 6mA DC
yes
30mA AC + 6mA DC
Type 2 (IEC 62196)
Female Socket
3x16A (3-phase) or 1x16A (1-phase)
CEE 16A (3-phase/3P+N+E),
CEE 32A (3-phase/3P+N+E)
6/8/10/13/16 A
11 kW (3-phase); 3,7 kW (1-phase)
400 Vac (3-phase), 230 Vac (1-phase)
155 V to 470 V (3-phase) (50/60 Hz)
90 V to 270 V (1- phase)
yes
yes (all parts)
from -30°C to +50°C
IP67 (100% water proof)
1 kg / 47 cm x 7 cm max.
PC05X
IK10 (impact/shock proof)
yes
yes
optional
yes
30mA AC + 6mA DC
Household 16A Schuko wall sockets must be designed for constant 16A current!
Portable charging station models PC03X, PC04X and PC05X can have some additional designation next to the number such as PC03xyz, PC04xyz and PC05xyz, where“x” and“y” and“z”
may be any alphanumeric character or blank, representing a color or wall plug type, or lower than standard charging current limit or factory version, or any possible future product
differentiations, which do not have an impact on general technical specifications.
RCD is an acronym for Residual Current Device - sometimes it can be called also Earth Leakage Circuit Breaker or Safety Switch. Its purpose is to prevent you from
getting a fatal electric shock if you touch live part, such as a bare copper wire under high voltage. RCDs offer a level of personal protection that ordinary
fuses/circuit-breakers cannot provide. RCD constantly monitors the electric current flowing through one or more circuits which it protects. If it detects electricity
flowing down an unintended path, such as through a person who has touched a live part, the RCD will switch the circuit off very quickly, significantly reducing the risk
of death or serious injury. Every portable charging station has integrated Type A 30mA AC + 6mA DC RCD what ensures maximum possible level of personal
protection as it protects users from AC, pulsating DC and pure DC leakage currents.
Rev. 0 6/2022
WHAT IS RCD AND HOW DOES IT WORK?
METRON warrants its product to the original consumer purchaser that it will repair, or replace, any product that is determined to be defective for the following terms:
Two (2) years from date of purchase on all components.
To be eligible for repair or replacement under this warranty, the product in question must be sent back to METRON within the warranty period and the
original consumer purchaser must comply with the following conditions: The product thereof must not have been modified or altered in any way by an
unauthorized source; The product thereof must have been used in accordance with the user manual. This limited warranty does not cover: Damage due to improper
use; Accidental or intentional damage; Misuse, abuse, corrosion, or neglect; Product impaired by severe natural conditions, such as excessive hail storms, lightning
strikes, tornados, flooding, ice or other natural occurrences; Damage due to improper packaging on return shipment. Any and all labor charges for troubleshooting,
removal or replacement of the product are not covered by this warranty and will not be honored by METRON. All shipping costs regarding repair or replacement of
the product is to be pre-paid by the original consumer purchaser.
LIMITED WARRANTY
GREEN PRODUCTION
All our products are produced in a carbon neutral way by using "
Sustainable energy cycle
" method. Production plant where we make charging cables and portable
charging stations is the first fully sustainable production facility for EV charging cables. All energy needed for the heating and cooling of the building, production
process and for transportation of goods and employees (except deliveries of heavy materials by trucks), is produced by 2 photovoltaic power plants and stored in
4 storage batteries. Almost all of the raw materials we use (cables, plugs) are produced in EU, to shorten supply routes and support local economy. Buying our
products helps developing sustainable economy.