MS9535 VoyagerBT
1
³ 0 0 0 C A 7 0 0 0 0 0 0
Connecting a Metrologic MS9535 to a USB BT
Adapter
I. Scope
This document will provide a brief description of how to connect the Metrologic
MS9535 scanner to a USB BT adapter.
Note: Adapters differ from manufacturer to manufacturer. This document was based on an
adapter from Widcomm and description may differ based on the manufacturer of the adapter you
are using.
II. Getting Started
Observe USB dongle, install into USB on laptop.
Scan “Provide Service” bar code found in the I&U Guide.
Click on
to open the USB dongle software.
Select “Entire Bluetooth Neighbourhood” to begin searching for devices.
Available devices will appear on the screen. Select the VoyagerBT scanner. Use
the last 4 digits from Voyagers Serial Number as the key for the secure
connection.
