background image

Important Safety Information

Page 4

MDE-4631 Metrologic® MS7120 Bar Code Scanner Setup · January 2007 

No Open Flames

 

 

Open flames from matches, lighters, welding 

torches or other sources can ignite fuels and their vapors.

No Sparks - No Smoking 

Sparks from starting vehicles, starting or using power tools, 
burning cigarettes, cigars or pipes can also ignite fuels and 
their vapors. Static electricity, including an electrostatic 
charge on your body, can cause a spark sufficient to ignite 
fuels and their vapors. After getting out of a vehicle, touch the 
metal of your vehicle to discharge any electrostatic charge 
before you approach the dispenser island.

Working Alone

It is highly recommended that someone who is capable of 
rendering first aid be present during servicing. Be familiar 
with Cardiopulmonary Resuscitation (CPR) methods if you 
are working with or around high voltages. This information is 
available from the American Red Cross. Always advise the 
station personnel about where you will be working, and 
caution them not to activate power while you are working on 
the equipment. Use the OSHA tag out and lock out 
procedures. If you are not familiar with this requirement, refer 
to information in the service manual and OSHA 
documentation.

Working With Electricity Safely

Be sure to use safe and established practices in working with 
electrical devices. Poorly wired devices may cause a fire, 
explosion or electrical shock. Be sure grounding connections 
are properly made. Make sure that sealing devices and 
compounds are in place. Be sure not to pinch wires when 
replacing covers. Follow OSHA Lock-Out and Tag-Out 
requirements. Station employees and service contractors 
need to understand and comply with this program completely 
to ensure safety while the equipment is down.

Hazardous Materials

Some materials present inside electronic enclosures may 
present a health hazard if not handled correctly. Be sure to 
clean hands after handling equipment. Do not place any 
equipment in mouth.

 

 

IMPORTANT

: Oxygen may be needed at scene if gasoline 

has been ingested or inhaled. Seek medical advice 
immediately.

Emergency First Aid

Informing Emergency Personnel

• Compile the following information for emergency 

personnel:

• Location of accident (for example, address, front/back of 

building, and so on.)

• Nature of accident (for example, possible heart attack, run 

over by car, burns, and so on.)

• Age of victim (for example, baby, teenager, middle-age, 

elderly.)

• Whether or not victim has received first aid (for example, 

stopped bleeding by pressure, and so on.)

• Whether or not a victim has vomited (for example, if 

swallowed or inhaled something, and so on.)

IMPORTANT

: Oxygen may be needed at scene if gasoline 

has been ingested or inhaled. Seek medical advice 
immediately.

Lockout/Tagout

Lockout/Tagout covers servicing and maintenance of 
machines and equipment in which the unexpected 
energization or start up of the machine(s) or equipment or 
release of stored energy could cause injury to employees or 
personnel. Lockout/Tagout applies to all mechanical, 
hydraulic, chemical or other energy, but does not cover 
electrical hazards. Reference Subpart S of 29 CFR Part 1910 
- Electrical Hazards, 29 CFR Part 1910.333 contains specific 
Lockout/Tagout provision for electrical hazards.

This area contains a chemical known to the State of 
California to cause cancer.

WARNING

!

This area contains a chemical known to the State of 
California to cause birth defects or other reproductive 
harm.

WARNING

!

Gasoline ingested may cause unconsciousness 
and burns to internal organs.
Do not induce vomiting.
Keep airway open. 
Oxygen may be needed at scene.
Seek medical advice immediately.

WARNING

!

Gasoline inhaled may cause unconsciousness 
and burns to lips, mouth and lungs.
Keep airway open.
Seek medical advice immediately.

WARNING

!

Gasoline spilled in eyes may cause burns to eye 
tissue.
Irrigate eyes with water for approximately 15 
minutes.
Seek medical advice immediately

!

WARNING

!

Gasoline spilled on skin may cause burns.
Wash area thoroughly with clear/water.
Seek medical advice immediately.

WARNING

!

Содержание MS7120 Orbit















Отзывы: