21
•
Add Control (R)
: The right Control key will be sent together with the
character programmed.
•
Add Alternate (R)
: The right Alternate key will be sent together with
the character programmed.
For example, to program the Prefix Code to be “Ctrl-Shift-B”, “C”, the
programming sequence should be:
1) “Prefix Code” label
2) “Add Control (L)” label
3) “Add Shift” label
4) “4” of the hexadecimal digit
5) “2” of the hexadecimal digit
6) “4” of the hexadecimal digit
7) “3” of the hexadecimal digit
8) “Validate”
Note:
In internal representation of the characters that are specified with
either scan code or associate key status, occupy two normal character
space each. So the maximum number of characters can be configured for a
string parameter will decrease, if these character specifications are used.
7.5 Exit Configuration Mode
Both the “Update”, and the “Exit Setup without Changes” labels will exit the
scanner from configuration mode when they are read. These two labels
differ in whether to keep the new settings on the scanner or not, as their
names suggest. The scanner will respond with 6 beeps and restart itself, if
either label is read.
Metrologic European Offices
22
EMEA
T: + 49 (0) 89 890 190
F: + 49 (0) 89 890 19 200
Email:
www.europe.metrologic.com
France
T: + 33 (0) 1 48 63 78 78
F: + 33 (0) 1 48 63 24.94
Email:
www.metrologic.com.fr
Germany
T: + 49 (0) 89 890 190
F: + 49 (0) 89 890 19200
Email:
www.metrologic-instruments.de
Italy
T: + 39 0 51 6511978
F: + 39 0 51 652 1337
Email:
www.metrologic.it
Spain
T: + 34 91 327 2400
F: + 34 91 327 38 29
Email:
www.metrologic.es
United Kingdom
T: + 44 1256 365900
F: + 44 1256 365955
Email:
www.metrologic.co.uk
