Metrologic 19-07335, Руководство по установке

Страница: 23 / 32

19
L
ASER AND
P
RODUCT
S
AFETY
Europe
The CE Mark is required on products which incorporate the IS4813 and the
IS4815 scan engines if the products are to be imported into European
Economic Area (EEA) countries. Use of the CE Mark requires compliance with
directives and standards dependent upon the type of product. Information may
be found at
http://europa.eu.int/comm/enterprise/newapproach/ .
Laser Safety
IEC 60825-1:1993+A1:1997+A2:2001,
EN 60825-1:1994+A2:2001+A1:2002
“Safety of Laser products”
Compliance with either of the standards listed above is required for the product
to bear the CE mark.
Note: Non EEA countries may impose additional testing/certification
requirements.
EMC
Certain combinations of microQuest scan engines and associated electronics
may require certification of compliance with the European EMC Directive.
EMC compliance of finished products in Europe can be accomplished by the
following method:
•
The manufacturer may certify to the EC’s Electromagnetic Compatibility
Directive 89/336/EEC. Compliance is required for the product to bear the
CE Mark.
Note: Non EEA countries may impose additional testing/certification
requirements.
Electrical Safety
The scan engines are built to conform to the European Low Voltage
Directive 73/23/ EEC.