Insert a new module for the Multi Autolab Cabinet
Figure 35 – Connect the cell cable to each M101 or M204 module and short circuit the CE and RE
and S and WE on each cell cable
Select one of the M101 or M204 modules added to the Multi Autolab Cabinet. When the
M101 or M204 module is selected, the cell will be switched on, with the internal dummy
cell active. The status LED located on the front panel of the M101 or M204 module will be
lit green (see Figure 36).
Figure 36 – The Cell status LED is lit green when a M101 or M204 module is selected
in the Edit Serial Number application
CE
RE
S
WE
32 |
P a g e
