5.7 Connecting sensors
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28
￭￭￭￭￭￭￭￭
916 Ti
‑
Touch
The 854 iConnect can also be connected while the instrument is switched
on.
1
Plug the plug of the 854 iConnect (3) into the socket of the mini USB
adapter cable (2). Observe the correct orientation (markings).
Figure 12
Plugging in the 854 iConnect
As soon as the instrument is switched on, the 854 iConnect is detec-
ted automatically and entered as measuring input into the device
properties.
Connecting the electrode
The 854 iConnect is used as measuring input for iTrodes (electrodes with
integrated memory chip).
Connect the electrode as follows:
1
Remove the protective cap of the 854 iConnect.
Figure 13
Removing the protective cap
2
Align the guide pin (5) of the electrode with the recess in the 854
iConnect (4).
