manualshive.com logo in svg

Metrohm 892 Professional Rancimat, Руководство пользователя

Поделиться
Скачать
Metrohm 892 Professional Rancimat Скачать руководство пользователя страница 12

1.3 Safety instructions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

4

￭￭￭￭￭￭￭￭

892 Professional Rancimat

WARNING

Only personnel qualified by Metrohm are authorized to carry out service
work on electronic components.

WARNING

Never open the housing of the instrument. The instrument could be
damaged by this. There is also a risk of serious injury if live components
are touched.

There are no parts inside the housing which can be serviced or replaced
by the user.

Supply voltage

WARNING

An incorrect supply voltage can damage the instrument.

Only operate this instrument with a supply voltage specified for it (see
rear panel of the instrument).

Protection against electrostatic charges

WARNING

Electronic components are sensitive to electrostatic charges and can be
destroyed by discharges.

Do not fail to pull the power cord out of the power socket before you
set up or disconnect electrical plug connections at the rear of the
instrument.

Содержание 892 Professional Rancimat
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды