Metrohm 2.899.0010, Руководство - Краткие инструкции

Страница: 49 / 62

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
899 Coulometer
￭￭￭￭￭￭￭￭
43
Unit
Unit of the sample size.
Selection g | mg | µg | mL | µL | pieces | User-defined
Default value g
User-defined
A user-defined unit can be created. This will be added to the selection
list. The previous entry will be overwritten as soon as the new unit has
been defined.
5.7.3 Sending the sample size from a balance
If the sample size is sent directly from the balance, then it will always be
entered in a new line at the end of the sample table. It does not matter
which line is selected or whether the sample table is even opened. In the
above example, the sample size is entered in line 5.
NOTE
If you would like to enter the sample size in a particular line, then you
must open the corresponding editing dialog (i.e. the
Sample data dia-
log is displayed).
If the editing dialog for the sample size is opened, then the sent value
will be ignored.