Metrohm 2.845.0010 845, Руководство пользователя

Страница: 29 / 73

3.4 Configuration
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
23
Details Of pH-Adjustment
Field for notes about the pH adjustment that can be in-
cluded in the
report (see section 3.4.4 ), e.g. set pH
value, solution used, etc.
3.3.4 Creating a method
There are 2 ways of creating a method :
•
Editing an existing method and saving it under a new name
•
Creating a completely new method (by clicking on or via the
menu
File, New... Method
)
Procedure for configuring a method :
1. Enter the
Total Volume
to be produced.
2. For all Components (except for
Component 1
, see section
3.4.2 ) enter the desired amount/concentration.
3. Enter the
Stirrer Speed
.
4. If you want to adjust the pH: configure the pH-adjustment .
5. Save the method .
3.4 Configuration
3.4.1 Depot
General information about Depot
The dialog window
DEPOT
can be opened via
Configuration, Depot...
.
The Components (see section 3.4.2 ) connected to the instrument
need to be defined in the Depot . The numbers correspond to the num-
bers of the Component connections
5
on the instrument.
Window "Depot"
Define and describe each Component connected to the instrument
under the corresponding number. Save the Depot you have drawn up
as a
.meco
file. The settings in the Depot must always be edited when
alterations are made to the connected Components .
The Methods (see section 3.3) are based on the Depot that was
loaded when they were drawn up. This means that overwriting an exis-
ting
Depot
influences the
Methods
that are based on this
Depot
.
In order for the mixing process to supply the desired result, the Com-
ponents specified in the Depot must correspond to the Compo-
nents physically connected to the instrument. The concentrations/-
amounts defined in the Depot will be used for the volume calculations
in the Method .