WC-SERIAL USER MANUAL
76-02-103 Rev.C
Page 7 of 17
1.1 WC-Serial
The WC-Serial is a compact unit as shown occupying half a shelf in a traditional
19inch rack. All connectors and LED status indicators are accessible from the rear
of the unit.
1.2 Safety
The WC-Serial must not be connected to cabling which would be required by
BS6701 to equipped with over voltage protection. The following ports on the
FCM5000 are designated SELV ( Safety Extra Low Voltage ) within the scope of
EN41003
Terminal RJ45
LAN Port(s) RJ45 10/100BaseT
These ports must only be connected to SELV ports on other equipment in
accordance with EN60950 clause 2.3
1.3 Electro Magnetic Compatibility
In order to ensure EMC compliance, all signal and data cables must be shielded and
use screened connector shells. The cable screens must be terminated to the
screened connector shell and not connected to any pins of the connector. Failure to
use the correct connectors may compromise EMC compliance.
